Second Ronin game

Last weekend I had my inaugural games of Ronin with Tim.  Here's a little report (with plenty of photos) on our second game.  We stuck with the basic Skirmish scenario, but upped our buntai to 100pts each, & swapped sides - I played the upstart Peasants, & Tim took on the role of the dastardly Yakuza this time.  I rolled the Minor Goal of controlling all quarters of the board at the end of the game (difficult!), while Tim rolled that he mustn't lose more than 25% of his force (Boss Matsuda was clearly displeased about losing so many of his goons in the last encounter!)

My plucky villagers of Sangawe consisted of local land-owner Ishida Mitsu 'The Red Widow' - a Samurai lady with katana & wakizashi (sword & short sword), her loyal bodyguard also with katana & wakizashi, Bokusui the eccentric Warrior Monk with bō (quarterstaff), a Peasant with bamboo yari (spear), and six more Peasants with improvised weapons.  Tim's Black Hand Yakuza mob consisted of a Lieutenant with katana, a Thug with a tanegashima (matchlock) & katana, five Thugs with katanas, & two Ruffians with ararebō (clubs).

The random starting zones resulted in us facing-off from opposite edges.  The Yakuza deployed their main group (including Lieutenant & matchlock gunner) centrally, while a single Thug & the two Ruffians were heading for the crop field on Tim's right flank.  My armed villagers were split into a group each side of the house, with the Samurai & Warrior Monk on my left flank, & most of the Peasants (including the one with spear) on my right.

First Ronin game

Today I played my first three games of Ronin with Tim.  It was an enjoyable introduction, with the attack/defence counter pool mechanic adding nice granularity to melee, but still being fast to play.  Here is a quick report on our first game - a little 50pts Skirmish scenario between the Black Hand Yakuza (me), & the plucky villagers of Sangawe (Tim).

My Yakuza mob consisted of four Thugs (basic-level) with katana, plus a Ruffian (low-level) with araebō (club).  One of the Thugs acted as the Leader.  They were opposed by five Peasants (low-level), four with improvised weapons, & one with a bamboo yari (spear). The Peasant mob was led by a Warrior Monk (mid-level) armed with a bō (quarterstaff).

The starting zones were random, & resulted in our mobs beginning on opposite table edges.  We both formed tight groups, & advanced at pace along the track towards the central choke-point between the stable & house.

Japanese rural scenery

My rural scenery set for Ronin is now more-or-less finished, other than completing a couple of rice silos.  Here are some photos of the 2' x 2' skirmish board featuring the rural pieces, with some peasants for scale.  The board itself is covered in brown felt, which cushions the underside on tables, as well as providing a quick & easy playing surface.  Haven't decided whether I will do any more to the board (e.g. dry brush with a lighter brown). 

The tracks & fields are simply cut from felt, with flock mixes glued on & fixed with matt varnish spray.  Seems to be minimising flock shedding so far.  The buildings are laser cut sets from Sarissa Precision Ltd (with removable roofs).  The crop fields are just sections sliced from a doormat - a very effective solution hat I have seen lots of wargamers use.  Lastly there is some of my scatter terrain pieces, made with real stones, a mixture of resin & plastic barrels & boxes, model trees, & a selection of flocks & Gamers Grass tufts.  The pile of firewood by the shed is off-cuts of plastic sprue.  The floor of the shed/stable is even lined with fake straw  :-)

I have a set of wider, straighter roads & a few more buildings (to be constructed) that will allow me to play village/town skirmishes.  I'd also like to get a lot more trees, so that I can run woodland fights.  Beyond that, I'd quite like a river with a traditional arched bridge, & boggy ground / rice paddies with raised walkways.  I'd also quite like to make a graveyard for an atmospheric chanbara showdown setting...

Japanese village house

Today I finished painting my first building for Ronin (28mm-scale chanbara skirmish).  It's a Japanese Village House / Outhouse from Sarissa Precision.  These laser-cut kits are easy to assemble, & after a good coat of spray primer, they take acrylic paint well.  After base colours I used dark washes followed by simple dry brushing to quickly achieve a slightly weathered appearance, good enough for tabletop gaming.  The window shutters & door are perforated, allowing them to easily be cut from the main structure to position as desired. I chose to leave the door shut, & used a variety of positions for the shutters.

Noble & Minstrel

My finished Noble (& her Minstrel) for my Lustrian-themed Warhammer Quest collection.  When I saw the Maika von Ostwald sculpt from Hasslefree, I knew it would make an excellent Noble.  There is an alternate charging version of Maika, but I also picked a Barbarian figure in a similar pose, & think the relaxed confidence communicates her character better.  I'd been looking for figures to use for the WQ Warriors which befitted the tropical climate of Lustria - so this miniature, radiating privileged arrogance / relaxed heroic confidence, minus the cloak so often sported by fantasy heroes, & with a conquistador-vibe seemed perfect.  I also liked the twist that she was female, & quickly imagined a backstory for her. 

I have painted her as a Marienburger (so not technically an Imperial Noble), & see her as the daughter of a wealthy merchant lord of that archipelago city-state.  Bored of the sheltered dullness of elite trading guilds, & even duller courtiers, she paid for passage to the New World for a life of high adventure, planning to put her sword lessons under the tutleage of some of the finest Tilean duelists to good use.  She prefers to live (or at least dress) as a man, as it makes for more ready acceptance into the male-dominated world of adventuring, & avoids the unwelcome attractions of would-be suitors.

The Minstrel is an older Hasslefree Miniature that I bought quite a few years ago, & he required a repaint to match Maika's colours.  He travels along at Maika's heels, quite literally singing her praises & lyricising her many virtues & heroic escapades.  Much to the annoyance of her fellow adventurers.

Yakuza gang complete

This weekend I finally completed work on my Yakuza buntai for Osprey's Ronin skirmish game.  This is a rarity for me, with my scattergun approach to the miniatures/wargames hobby - a finished force... it helps that Ronin requires fewer than a dozen figures a side!  I posted photos of this Yakuza buntai back in October last year, when it was a 95pts roster max, but since then I have expanded it slightly so that I can field 149pts for larger games. 

Ya-ku-za (8-9-3) is the worst losing hand in the game Oicho-Kabu, & alludes to the illegal gambling dens that were set up by local 'bosses' in late-Edo period Japan. These crime bosses would run gambling, loan-sharking, prostitution, & extortion rackets, preying like parasites upon the rural peasantry. Some Yakuza gangs grew in influence to encompass several districts, so that lesser bosses owed allegience to more senior ones.

The term Bakuto (gamblers) was also used to describe such gangs, and those who associated with them. Gambling was illegal, and regarded with disdain by society at large. Gambling dens would often be set-up at the edge of towns or villages, sometimes in abandoned temples or shrines.

Below are rosters for 50pts, 100pts, & 150pts games with this force.  In the biggest roster, the Yakuza have hired a pair of Ronin (masterless Samurai mercenaries) to bolster their mediocre abilities.

Ronin

Today I put the finishing touches to a pair of Ronin... for Ronin, the Osprey skirmish game!  These are two of the figures from North Star's Koryu Buntai, of which seven of the figures are based on the iconic ronin from Akira Kurosawa's 'Seven Samurai'.  The characters of my ronin suggested themselves to me as I considered the sculpts before deciding on paint schemes.  The one with the nodachi (great sword), with his pouch of coins & smart appearance suggested to me a fairly wealthy ronin.  A brash, showy character who splashes his money about on drink, gambling, & women.  By contrast, the more circumspect-looking ronin with the ragged-edged cloak & bare feet suggested to me a down-on-his-luck ronin, perhaps with an edge of bitterness about him.  I'm thinking that he may have been expelled from one of my other buntai, the Koryu (Sword School) in dishonour, & resents this treatment.

The wakazashi (short sword) on the ronin in the fancy white kimono is one of the 3D-printed katana that I bought for my figures that have them in the rules, but not on their sculpts (e.g. my Yakuza thugs with arquebuses).  I trimmed & filed it to a suitable length, & sculpted a sash loop for it using Green Stuff putty.

Most buntai in Ronin can make use of Hired Swords such as these wandering ronin, but I will mainly be using them as hired muscle for my Yakuza gang.

Fighting Pit WIP

Here is a photo of my WIP Fighting Pit tile for Lustrian-themed Warhammer Quest.  I opted for
spectator walkways to the sides of the pit, as the original 2D WQ tile used this space for sunken walls painted in perspective; & I always thought the Fighting Pit was lacking sufficient space for spectators.  Concentrating on this Objective Room as one of my first 28mm-scale tiles has helped me iron-out the design principles that will feature on the whole set of dungeon tiles, & gets one of the more complex tiles finished early in the project.

After experimenting with raised dungeon tiles to allow for depressions such as the Fighting Pit & Fire Chasm etc (as well as magnetically-attached doorways!), I settled on the approach shown here, with slots at the appropriate points to allow for doorways or sections of blanking wall to be slipped in.  I did consider 30mm-high ('human-height') walls so I could get lots of overgrown Lizardmen ruins detail in, but after careful consideration & consultation with gaming comrades I have settled on low cutaway walls, which suggest the overall look while allowing better visibility of figures on the tabletop (as well as being less effort & taking-up less storage space).

Any suggestions or observations welcome  :-)

Lustrian Warhammer Quest WIP

Building a Lustrian-themed 3D Warhammer Quest set is one of my far too numerous wargaming projects.  I have several 3D dungeon tiles in progress, & am now finalising the design of the integral walls & doors.  Thinking of using magnets in the walls to join the tiles.  I've enjoyed planning & implementing fantasy miniatures with a jungle 'lost world' twist, including a group of Warriors that isn't the standard male-dominated fellowship including a wizened grey old man.  My Warrior party includes a female Noble disguised as a man, a dark-skinned female sorceror from the Southlands, a native Barbarian escaped from slavery in Naggaroth, a female Wood Elf archer, & a female Dwarf Trollslayer.  As some motivation to get a move on with this project, I decided to make a list of what miniatures I have for this so far...